A standard solution has an accurately known concentration. To prepare one from a solid: (1) calculate the mass needed, m = M × V × molar mass; (2) weigh the solid accurately on a balance; (3) dissolve it in a small volume of distilled water in a beaker; (4) transfer the solution quantitatively to a volumetric flask, rinsing the beaker and funnel into the flask; (5) add distilled water until the bottom of the meniscus touches the calibration mark at eye level; (6) stopper and invert several times to mix.
Key terms
- Standard solution
- solution of accurately known concentration
- Volumetric flask
- flask that holds a precise volume to a mark
- Stock solution
- concentrated solution used for dilution
- Dilution
- lowering concentration by adding solvent
- Meniscus
- curved surface of a liquid in a narrow tube
Key formulas
Summary
- Weigh, dissolve, transfer, make up to the mark, mix.
- Dilution keeps moles constant: M₁V₁ = M₂V₂.
- Always add acid to water, never water to acid.
In everyday life: Health workers preparing oral rehydration solution (ORS) for children with diarrhoea must dissolve one sachet in exactly the stated volume of clean water; too concentrated or too dilute is harmful.
Check yourself
- Why is a volumetric flask used rather than a beaker?
- What mass of glucose (180 g/mol) is needed for 100 mL of 0.50 M solution?
- Why must concentrated acid be added to water?
Practice questions
1. What volume (in mL) of 1 M stock is needed to make 100 mL of 0.1 M solution?
Show answer
Answer: 10
C1V1 = C2V2 → V1 = 0.1 × 100 / 1 = 10 mL.
On WeLearn
The full lesson: reading notes, worked examples, class activities and the Unit 2 quiz
Study Preparation of Solutions on WeLearnTeach Preparation of Solutions with WeLearn
We will bring a demo to your school: a lesson on your interactive TV, a virtual lab and a classroom game, with your own teachers.
